The problem was due to a support bracket on the feed bar wearing down & the bar bending when it has tension on it, meaning that it feeds paper at different rates from right to left. It is adjustable but requires a big strip down to get to it. I had to adjust it to it's max so not sure how long...
I have an Epson 9880 with feed & possibly skew issues but I need the adjustment wizard software to run the checks & adjust if needed.
I can't use the printer at the moment so could really do with some help getting the software.
Thanks in advance
I've got two 9880's and the length of the prints on one printer are too short.
If I print say an 800mm image on one then it comes out 800mm long but if I print on the other it comes out about 795mm & banding can be seen on the image. Not only that but if I measure the image side to side there is...
Hi
We have two Epson 9880 44" printers & one of them has a problem in that the head randomly clogs.
The strange thing is that it will be printing fine then about 1cm into a print, one of the colour's partially blocks. Normally running a head check on the printer sorts it out but it's becoming...
As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line.
“We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month.
Learn how…….