Search results

No - I'm referring to the punch positions. I'm using the device that you suggested and it seems to work with the exception that it keeps changing my punch position from A on the bottom to B on the right side. Maybe I need to change my sheet size orientation?

Al: Dumb question....How come when I select "A" and put in my coordinates, it changes it to "B"? I get the right orientation in Preps Preview, however when I view through Prinergy, the orientation is correct as far as the image goes, but my sheet size is rotated 90 degrees.

Thanks Al. I'll give it a shot and see how that works. I used to work on RAMPage and we had to set up our own RAMPage ppd and sheet sizes manually along with the punch so moving over to Prinergy has been a bit of a change to what I'm used to.

Are you talking about the ScenicSoft Color ppd?

Hi Patrick: Using the PressSheetSize works perfectly when imaging plates for larger sheet sizes (17.5x22.5) but why does it shift to the bottom when using a 12x18 or 11x17 template? I tried to find the Magnus400S in the Brisque Devices, but it's not there. There's the Magnus Quantum and, if I...

Thanks for responding guys...it helped out a lot!

So nobody out there has had to adjust the image position on the plates? or does this just come automatically with the ppd?????

Hey All: I used to work at another company that used the Rampage workflow and we used to set up page sizes in the ppd and went through the steps of saving and loading the profiles so the plate would be positioned correctly on the sheet (Preps 3.7). I have been working at this company for 2...

Hey Everyone! Quick question....We're running Prinergy Evo 4.1 and we're looking to upgrade our old G5 Mac to an Intel Mac. Does anyone know if we can install the 4.1 software on an Intel Mac or do we have to get an upgrade that's compatible? Thank You!

Where can we find memtool3? We tried the force download but that didn't work either.

Hi PACH: It is a manual plate loader and we replaced the distribution board because it shorted out when imaging a plate. The part of the board that blew out was the vacuum pump power circuit. It arc'd against the frame.

The operation "PutandGet" of Local 3 card is what comes up in the error message.

It just says that it can't connect to the Local 3 card.

PACH - It's not recognizing the Local 3 Board. Since we replaced the main distribution board, does the distribution board have to be programmed to recognize the Local 3 Board? When we pull up the Local 3 Board it shows all zeroes.

Thanks Pach for all your help! Another question....do you know where the "Local 3 Board" is? We installed the new distribution board, and it's coming up with and error with that board.

Hey all - We just had a distribution board replaced and it's coming up with an error with a "Local 3 Board". Does anyone know where that is located?

Would anyone happen to know the part number for the distribution board on a Magnus 400 or where I can find it?