Search results

Every brand has a small production machine you can put a Fiery on. I would just start calling some places and get prices to see what you can afford. How many pages are you wanting to perfect bind? You can get saddle stitch booklet makers that do 50 sheets and a square back maybe that work for...

What kinds of jobs do you run on over 700mm? I am just curious. I was having people wanting 27.5 inchs to do tri-fold brochures. You can do longer from the bypass tray but that tray only officially does 80# cover and I don't think you would want to do a ton through there. On the 9200 you can...

Do you have trouble with the Enpress? Just curious because I remember you posing about having the Impressa. My experience with those two machines is they seem touchy about how you load the envelopes but when you get it right it runs really good.

Did you have the impressa before?

Higher humidity is usually better for that but I would expect that is is not low this time of year.

I have seen places laminate sheets together to get the super thick business cards but not putting different colors together. That is a great idea!

You can do three sides without a issue on the 7210. If you try and do the leading edge full bleed it will jam in the fuser. The only Ricoh machine I have had issues with the Ricoh 5100 because it doesn't have a cleaning blade on the paper transfer roller. It has a mode for trailing edge full...

Sounds like they mean color registration issue where the colors are not aligned. What does it do if you print something on just 20# letter size? If it doesn't work on at in the menu on the printer you can run color registration.

If they take the finisher off and it gets rid of the marks I would think the finisher is the problem right? I have see other machines where it's so hot coming out that the rollers in the finisher leave marks. If that's the problem maybe you can run at a lower temp or just take off the finisher.

I am sure the dealer techs know as much as we do and they should have a regional ricoh rep they escalate to and get onsite. I assume the issues you are having are with command workstation running on the Fiery itself right? Have you tried just running the command workstation version that is on...

Are they reloading from the disks or some kind of backup image? I wouldn't think the communication with the printer would cause mixed media setting to be lost. What command workstation version is on there?

How many color pages are there in a binder? Could you print the color pages then put them in an inserter on the black and white machine to avoid doing a bunch of stuff by hand?

What are you using measure the calibration page? Something like an ES2000 / i1 handheld scanner or something inline or something else? I have seen this from using that board that comes with the handheld scanners. I needed to put paper under the calibration sheet it's like it was reading through...

Have you measured the image size on print out of the actual job?

My Plockmatic experience is that you can adjust the square fold pressure to the point where you can crush the egde more that you would want so I am sure it can match what the xerox one can do. They should be able to give samples. Plockmatic has some good videos on their YouTube page. The...

Yes I agree you can get a contact on a used machine. Just talk to the local service manager before you buy and see what they want done to it before they will cover it.

Do you mean the fold skewed or the face trim? Or do you mean the bleed trim on a full bleed book? I though the poster was looking for face trim with a square fold.

What's the buy out on the existing machine? I don't think I would want to lease a 5 year old machine for 5 more years. Are you talking about adding a different booklet maker to the existing machine or does it already have the SDD one? What's it cost to just go month to month on the existing one...

I see some places where they have low counts like that at the end of the term. Sometimes it's a place where they are using the prints as part of making another product or some are in offices or internal office print shops.

You wouldn't think they would recommend someone they will not sell parts to.