Search results

At those amounts I would suggest at a minimum the 5300 and keep the 5100 as a backup. If doing 11x17 you would benefit from stepping up to a green line (refurbished) 7200 from Ricoh. At those volumes you should be able to support it if this is pay for print.

You need to upgrade so you can print 50k 11x17 2up and cut them.

I would push the tech to tell me what in the paper would cause that issue.

This will give you an idea of what MCS can do, not sure it would be the right fit for a reseller but talk to them:

What are you looking to print? You have options in Black only, the cheapest would be HP45 cartridge based solutions like the AP3, but if you will be printing HQ graphics they are not the best fit as you will have gaps in between the cartridges.

A good proofing software will keep track of all the changes in a history or notes field so the customer will have that in front of them everytime they request a change through the software. You can then put in that change 1 of 3 and 2 of 3 and 3 of 3 so they know ahead of time.

Just as a side note, I used the 931 for envelope printing, I did not do many solids on it.

Take a look at the transfer belt to see if it is marked up, I would get that when toner would build up on the front of the transfer belt cleaner. If you can open the front door while it is in the middle of printing you can check the image on the transfer belt, if that looks ok then look at...

If you need PMS matching then I would look into the Ijet 1175 pro or the kirk rudy firejet 4c.

What quantities will you be printing?

Most of the newer Inkjet envelope printers use pigment ink which is not water based like memjet inks and does not smear. With that said I have a colormax8 and you have to get the envelope pretty wet for the ink to smear, if it is a top shelf mailing you can use special inkjet envelopes that...

You just reminded me I need to do a backup on my 7200 fiery. We print .pdf's exclusively, we have had some lockup the fiery but figured out the issue with artwork and keep on printing.

Why not counter with, "Sure, would it be OK to take off Wednesday since I am working on Sunday?" BTW, who has seminars on Sunday?!?

Ahh ok, you wouldn't be familiar with the glass I am talking about, tell the tech to check the glass as well and he should know.

I have yet to find automation software that can fix Canva files.

I have had this issue in the past, make sure your humidity heater is turned off (doesn't help with this): Also the tech should vacuum out all the toner in black and put in new developer to see what that does, check out your pcu cleaner and drum to make sure its OK. I am sure they already...

I remember our tech having to vacuum out the toner and clean/replace a bunch of sensors when we had this happen. He also replaced the developer a few times to fix this issue, that was a lot of vacuuming as well.

If by fired up you mean turned it on then yes, you will have issues. I never turn off my 7100 as it will always have issues coming back up. I have had the same issues as you in the past and had to have a tech come out and replace parts to get it running again. Once I get DEM fail and Initial...

Not a bad price at all, looks like it comes with a used printhead and wiper roller with motor. Does it only come with the 2 black ink tanks? How many clicks are on it?

Heck, if your volume is really low you could get the DS-40i with tri-fold kit for fold only jobs. https://mail.quadient.com/en/folder-inserters/ds-40i