Search results

Hi. I’ve sorted it now . Thanks

can anyone help me on a Kodak 400 . Need to transport it but not sure if I need any transport brackets or anything to lock down for safety. Any help please thanks

hello all . Wonder if you can help me with how to disable second sensor on the exit conveyer . The customer had a glunz and jenson wash unit connected to the suprasetter but doesn’t need it now he’s using Fuji zp . The wash unit hasn’t been switched on but is still cabled to ctp. A previous...

Hi all. A customer has gone onto Fuji process less plates and needs to remove the Agfa vcf85 from the Heidleberg. Is this strait forward as unplugging a coms cable and trying it or do I have to change a setting in the suprasetter to make it not connect to the Agfa. Thanks in advance

Didn’t think it was possible . Customer still convinced his supplier can do this. Like you i remember we converted most 2055 from 5mw lap v to 60 mw pro v . This was at apex when they paired up with Fuji but the thermal would melt the plastic correction lense i recon.

Thankyou Martin that’s great news I’ll make some enquiries

Cron are still selling the violet ctps but it was a Palladio customer who couldn’t get plates for his Ryobi 680 so I was called in to scrap the perfectly working machine so he could install a 4300 . Yesterday I went to install a 2055 which was bought privately and he was told by 3 plate...

I’ve Just been told that Kodak ,Fuji and Agfa will be discontinuing UV plates by the end of the year and already my supplier struggling to supply B2 size Fuji plates. A plate dealer here in the uk said it may be possible to convert the Agfa Palladio 2055 to thermal by changing the laser ...

Thanks I’ll post back when I’ve visited the site

I’m going to see the machine Monday so I’ll do some tests and report back

It’s E4eo04 error . Topsetter 74 thanks

has any of you guys had this . I’ve not visited yet but the plate images half way and then fails mid scan . customer has spoken to a Heidleberg engineer on the phone and they say it’s a board or diode but surely that would error before starting to image . I’m thinking more cable fault ?

Thanks . I’ll try that

We’re in uk . He is running on win 2000 and can’t use teamviewer as os is too old .

Is that something I could do ?

They use am screening but it’s also visible on a solid . About a year ago he replaced the lead screw drive step motor with a used one from eBay . He got two motors . He then got the local sparky to crimp the old connector to the eBay motor and seemed ok for 12 months . I’ve just done the same...

Yes. All over the image and almost look like a grain on the plate and you have to hold it to the light to see them

Hi. They are agfa azura thermofuse positive plates

Morning all. Just helping a customer with a Heidleberg badged creo . He’s getting faint lines on the image. Barely visible . No errors and in the direction of scan. I’ve cleaned the lense and lubricated the lead screw but it’s still there. Any suggestions please