Search results

There is only so much SW can do to compensate for registration. Every V80/180/2100/3100 I commissioned required an onsite tech at install that spent a few hours honing in the registration. Every tray. Front and back. SW is not going to correct a crooked registration assembly. They all need to be...

The J75 is the best of the lot. It was designed before the cost savings were put into the others. Former Xerox Tech

if the ink is dry and does not melt in the fuser shouldn't be a problem.

Xerox EOL machines every 6 to 10 years. That said, Nuvera IOT hardware is the same from one generation to the next, the only difference is the controller. So technically, anyone repairing a current gen Nuvera, should be able to keep yours running.

There is no resolve to the 2nd btr issue. Best you can hope is try another brand of paper.

Weird, procon should be on by default. Panic stop means opening a door when the machine is running to stop paper throughout it's path to determine where a defect occurs.

Panic stop the machine to see where the defect occurs. Could be something on the cooling belts/pressure roll. Could be a DOA reman fuser. Did problem occur before they replaced fuser?

I know it's the vacuum belt because my former team tested it extensively. It's the buckle the paper makes when transitioning to the belt. My SME brought it to my attention and showed me how to reproduce. Full disclosure: I am a former direct technician. We've played with adjusting fan speed...

This is caused by the ramp angle from the 2nd btr to the vacuum transport. I've raised it to "deep dive" and they will not look into it. If you look closely you can see the banding lines up with the area between the belt segments. New parts will not fix. If you print in purple you may see the...

Do a restore factory image on the fiery. It should be somewhere under server management.

Color consistently is okay on the versants if you use one spectrometer between the machines. We have an a account that does about a two thousand a day and we see them about every other month. We have an account that runs them about 16hours straight a day and we are there daily just waiting to...

I've heard nothing. Iridesse and Versant are developed by FujiXerox(FX). The FX partnership is dead and FX is renaming themselves to Fujifilm Business Innovation. They will compete with Xerox in NA/Europe. Xerox will need to find an OEM to replace equipment in this space.

They did a great job. They would threaten local management an hour to fix an issue before they escalate to the regional VP or higher. They had a lot of power in the old X. Carl's Team has been laying off positions left and right without knowing what they do or knowing impact to business...

Carl Icahn's management team eliminated the advocate position. Customer 2nd level is for networking/driver/fiery issues.

It's the drum

If you are using smb try ftp

The drums that ship with your new Xerox are from FX. They will make life and are often a different color. Everything you replace after is domesticated by Xerox. Xerox does not have the in house expertise to make a good drum or run any sort of QA. The scientists and engineers who knew how to make...

As for 2nd BTR in Versants there are new ones available being tested in accounts that have poor life. There is also new nvm scripts released a few weeks ago that improve the current one.

Your mylar tabs are being stuck to non toner area or toner coverage area? If it sticks nowhere, it's the oil. If your RAM assembly is full of something that doesn't look like clean oil, I would have a tech do a purge/clean, and check the metering blade/doner roll for wear. It is an HFSI item.

Another option is to use any A4 Xerographic printer and print on waterproof paper. It's effectively melting plastic into the paper.