Search results

Hi Good day: Attached is there 3 pages for troubleshooting, in according with the serial number 1994 year. Hope you can fix it. Let me know, sincerely. Blessing [email protected] Mobile+WhatsApp:+505 861 1441

Send me the ID plate of your paper cutter, for to be sure about serial number and year in that way, we must sure. And give me your email please However if your machine does not have the CRT monitor Not apply the instructions, serial number if is from year 1994 must be read 94000D to 94999D ...

Hi sir: Please follow the steps attached, and fix it. However test the battery for low voltage, can be the Big possibility, If you Never replace the back up battery, the information is Lost, and need to Reinstall the software. Let me know, sincerely Blessing [email protected]...

OK, Let me know sir. Blessing [email protected] Mobile+WhatsApp:+505 8861 1441

Hi sir: The 1 steps: is test the Power supply Low voltage undervoltage 24V, cause can be control voltage too low 19V, Check the power supply vs the schematic diagrams from your TechnoTran HydroSTAR Compact Alpha.d. and Repair. 2) Look for loose connection, corroded, or broken lines, or...

waiting details sir Blessing [email protected] Mobile+WhatsApp:+505 8861 1441

Waiting your email Blessing [email protected] Mobile+WhatsApp:+505 8861 1441

ok Thank you Blessing [email protected] Mobile+WhatsApp:+505 8861 1441

Hi, i have some of them from Duplo. Send me email, please Let me know, sincerely Blessing [email protected] Mobile+WhatsApp:+505 8861 1441

Please identify why type of Technotran do you have ? if you take some PIC from ID from the plate of Technotran for help you, in the troubleshooting Let me know, sincerely Blessing [email protected] Mobile+WhatsApp:+505 8861 1441

send me your email Blessing

Service and Maintenance complete Multilith Blessing [email protected] Mobile+WhatsApp:+505 8861 1441

Hi sir I have some tech documentation for Multilitih Let me know, Blessing [email protected] Mobile+WhatsApp:+505 8861 1441

Hi sir: I can quotate from Other place from Malta if you want send me :1) model 2) parts number 3) serial number 4) delivery country 5) quantity Blessing [email protected] Cell+WhatsApp:+505 8861 1441

Hi sir: Hi sir: Look for error 03 1) Dampening solution supply interrupted 2)Dampening solution connector Not properly connected 3)Supply pressure too low 4)Level sensor dirty 5)Lever sensor defective Blessing [email protected] Mobile+WhatsApp:+505 8861 1441

Sir you can NOT configure , if you first does Not fix the power problem. Please do it, after that you can do it. i will instruct it. Blessing [email protected] Mobile+WhatsApp:+505 8861 1441

Hi sir: 1) you must Tight all the power Inputs cables+wires for Feeding machine 2) Tight the wires power Primary to the main transformer 3) tight the power wires secondary of the main transformer of the machine. 4) Test the main switch of the machine, can be fault, by the contacts : a) dirty...

ok sir. Thank you in advance, sincerely Blessing [email protected] Mobile+WhatsApp:+505 8861 1441

I have others Models, but Not that you are looking for However is the same system, for troubleshooting, as I did indicated Blessing [email protected] Mobile+WhatsApp:+505 8861 1441

Hi sir: Please test : 1) Fuse or circuit breaker . 2) The switch of Powder Unit . 3) if are o.k measure the Transformer primary and secondary Voltages if are o.k???? 4) if are o.k mesure the Rectifier Bridge if the output is o.k againt the Schematic Diagrams. 5) Look for loose wires, or...