Search results

I don't have a B&W device

I've got a business card where I've printed the color. Laminated it. Printed the black. Then foiled. I've got small specks of foil in random spots. What are some ways I can get these to go away? Or is there a printer/file setup change I need to make? The foil print was printed black only in...

I run the synaps XM on my Ricoh 7210x, i don't use the "synthetic" setting. I run it with the same settings as glossy cover. It works great.

Letting it sit works, however that isn't usually possible. I use an ionizing static gun. It connects to an air compressor and does a great job, sometimes i have to spray the material a few times, but spending 1 minute doing this is a lot easier than fighting the static.

We have many positions available. Do not attach your resume as a reply to this message; it will not be considered. Please follow this link: https://recruitingbypaycor.com/career/CareerHome.action?clientId=8a7883d08afcf3b0018b145b498d0619

We are trying to get our liquid dry-erase lamination dialed in. Our only problem is colors like black and dark blue are pooling and/or bubbling. The liquid laminator is a VersaCoater XL Digital Smart Coater with UV curing. We are using Advanced Print & Finishing Technologies Instacure Dry Erase...

This position has been filled.

Grub hub or Instacart?

I am hiring for a Production Print Specialist. This is not an entry-level position, you need to have experience. The job posting should answer most questions. It may say Lancaster and York, but we are in Everett, WA as well. All 3 locations are owned by the same group and share the same job...

We've had our 618 for almost 3 years now almost 2 million cuts. We have had to replace the blade once, but never the rollers. Cleaning the rollers helps a ton, also if you leave it on, it will rotate the rollers on its own every so often to avoid flat spots. We still run the original rollers...

No our prepress does not do design. We have a separate design department. I like your thoughts about sales though.

We had our blade assembly fail after 1.6 million cuts. We figured since the moving parts had to be replaced we'd just replace the blade as well. Was surprised to see that they sell the blade 2 different ways. One way is by itself and the other is as an assembly with all the moving parts. I think...

It would be nice if we were all in the same building - this new building will bring together 3 others - so we are making progress.

We do not have any offset presses. We have the following: 2 - HP R2000 1 - SwissQ Nyala 1 - Durst P5 4 - Epson 64" surecolor series printers 1 - Ricoh 9500 1 - Ricoh 7210x 4 - Colex Sharpcut 1 - Kongsberg C64 2 - Zund D3 1 - Rollem Insignia 6H Prepress has a hand in the setups of almost...

Currently, most of our departments are under one roof. We have just signed a lease for a new production warehouse that will house our production, bindery, and shipping departments. Our sales, design, administration, and prepress employees will all be housed back at the old building. I am...

Ink/Toner cracks on the 1200, so it probably will on the 1300. Just an FYI for any jobs that have full coverage.

I would say get new developer. I had a similar issue and replacing the developer fixed it.

We have officially moved our 2" and 3" indoor glossy stickers to the Ricoh. Based on volume we may move other indoor stickers to our Ricoh as well and then die-cut them. We are finding we don't need to laminate these as many of the designs are seasonal and they are not expected to last long...

What equipment are you printing with?

We already use our roll printers such as the colorado to do them. The problem really lies in the speed of printing and the finishing. We don't have a label press, so we have to use our wide rolls then laminate, then cut out on our colex. Smaller items take forever to cutout on a colex. If we...