Search results

Press chiller system needs rust inhibitors and glycol if its a closed system, press fountain system can be cleaned with bleach. flush system with warm water and mild bleach liquid. Make sure system has been flushed again with clean water before filling with fountain solution chemistry

If your wet trapping lamp output is not a factor, that would be more about rub, scuff, setoff, blocking etc. Things that can influence trap could be Ink Strength, Ink tack (tack sequence), Fountain solution (running too much or badly formulated), Stock absorbancy, running too much water in...

we used bleach when I was running a newsprint web press, did a thorough clean of the Dampening System every week and the stuff that came out looked liked new life forms

Humidity? have you checked

Our Corona unit had a light fitted that would flash if the unit did not come on or reach correct voltage, the operator was so far away from the unit that they couldnt see the whether the unit was on or off, Any electrician should be able to wire in an alarm

try attaching some copper tinsel and grounding it, this sometimes helps to reduce static

They do all kihds of printing on their bags did you read the whole website?

https://www.bancroftbag.com/

https://www.hubergroup.com/us/en/

wonder how many people you may have infected with your careless behaviour, selfish bleeder

Talk to your ink supplier they could also be a supplier of pressroom consumables and you could probably get a better deal as you are using their ink.

"An ounce of prevention is worth a pound of cure." You mean 'A Gram of prevention is worth a Kilo of cure' Doesn't have the same ring to though

https://www.theguardian.com/business/2020/dec/07/ikea-to-stop-printing-catalogue-after-70-years-as-customers-move-online

Something like that yes

Or a 'Nats' as we used to say

Blimey there's a name from the past Nebiolo. I used to have one for their printing press that was so old it was illuminated by some monks. sorry cant help but thanks for the memory

when I was running UV litho we had to have all the lights around and over the press 'shielded' against the stray UV light from our plant lighting. It would start the Polymerization process of the ink in the ink fountain and rollers. Just some info from a UV litho guy.

Not sure if this is relevant Do you have a regular Anilox roller cleaning procedure in place and do you have a way to measure/check the condition of your Aniloxes