Search results

What is the name of your CTP machine? Palladio? Galileo?

agfa lithostar lp82 is a plate processor only :)

Problem fixed

Just make screws 1 and 4 loosen and see if it's possible to remove the platen with sensors.

Could you make a photo and public it in here?

Here is how to do that. You will get a solid error if one of these sensosr is disabled.

Impossible! You need new electronics to turn On and OFF Laser diode properly And laser optics should be changed because of different glass cover layers and beam size. Even switching to the laser with the same Violet spectrum but more power, needs whole NEW laser block.

Clean the whole intake air system: remove black plastic duct, remove the fan and clean the propeller and metal mesh/grid, wash inside with a soap and dry the duct. REPLACE the AIR FILTER! You can use compressed air as well.

I see :) That means your Galileo did not boot at all! You have to open the Galileo door (or cover) from the Service side (where all cables are connected), remove the black safety locker and insert it into the red safety switch. Turn the power ON the Galileo and tell me - do you see red LEDs lit...

Hi, Give me a screenshot of your BOOT LOG window please

What command did you send? Move bin to load door? The Shutter is disconnected in case Plate Manager installed. The Shuttle?

And even re-use them.

Oh, that's quite possible your RIP dongle works with Accuset imagesetters only (cheaper version of RIP). And your RIP is like a dino ages old, supporting PS Level 2 only.

Accuset 1200 means Accuset 1000 imagesetter with embedded RIP board and HD /RIP Star 200/. You need some kind of access to that RIP, using special AGFA program like AgfaSet (PC or MAC version) or another PostScript downloader. For 1Gb HD you have to create postscript files in Notepad and save...

You are correct, but as I know, Epson provided Firmware Update program on the CD coming with the printer. Epson Printer Service Utility CD. Some users removed "smart" chips from AGFA ink cartridges to place them on Epson ones and used chip resetter to make them "new". There are many ways to cheat :)

Agfa Sherpa 24m is OEM Epson 7600. You can use it as pure Epson with Epson inks and media. In some cases new Sherpas 24m came to the Customer sites with Epson original CDs (with drivers and profiles). Agfa used their own inks and papers (plus color profiles) for Color Proof to let that Epson...

kyle, do you know what kind and capacity HD needs for RIP Star 200? SCSI HD and 213MB volume only, and formatted for 200 MB. That RIP does not worth even my time to type this post.

62 Possible Out of Media (or Jam) Input presense sensor and media movement sensor - one of them does not produce a signal when film moves.

You have to format that HD with a special PostScript commands to make it bootable and to download boot files, ethernet communication files, PS interpreter, fonts and screening tiles like ABS, Standart and Adobe Accurate Screening. All files were stored on 1.44M floppies. MAC or PC versions...

AGFA told you 150 lpi maximum for conventional and XM screening, meaning moire-free ABS and Sublima. You are waiting for the miracle coming from newspaper's designed machine. Ok, say thanks to Punch Graphix and AGFA, if you were able to use 175 lpi without moire headache. Today you made some...