Search results

AGFA finishing gum; you have more thicker layer on plates than normal. Check and readjust squeezing pair of roller at gumming section before a dryer.

Farshad, that guy has neither parts nor service docs for fast and correct diagnostics. Positioning himself as a Field Serviceman, he tried to grab any opportunity (AGFA, ECRM, Panther etc) to earn his money, then he imediately appeared at some forums and started asking the question how to fix...

Discussed in here a few times http://printplanet.com/forums/agfa-systems/27033-avantra-44-error-149-a

I have nothin' personal against iCTP, they have their nishe and have a right to exist. I've said about printhead nozzles, driving user nuts.

As a certified FSE by Denmark ScanView A/S Co (who created that imaging system AKA DotMate), I confirm there is nothing to create a squeaking noise at the imager side when IDLE, but the processor could, because of very low speed of rack rollers to avoid any crystallization at air/fluid border.

Outsourced to Israel..., and Canadian guys from Van were not supportive because they were laid off "in the middle of the road". Every programmer will tell you that's much more easy to start the scripting from the scratch than to follow somebody's programm.

Even better - only spinner has to be replaced, but new Software to be downloaded/re-written on DEC and OCP. 44XT - DEC to be replaced as well.

Yes, maximum speed is 1000 rpm for both types, but are drum dimensions different? I'm sure 102 has longer drum but did not find info about drum diameter. And don't forget there are SCREEN 4000 and 8000 OEM CTPs!

You are searching too far... :) Accuset 800 plus - Attachments

Heads are the same (32 LD head), loader-unloader is the same, drum size is different. The only one reason: bigger format needs more time to be exposed, so less plates per hour be produced. Need more plates p/h - look at PF102 model with 64 laser diodes imaging head. 20 plates at 2400 dpi. I've...

Due to the last generation of PhotoPolymer plates I stay close to you as well.

Winnipeg Sun used (I'm not sure nowadays) 2 Galileos VXT with LP82 in-line with a conveyor and a bender for 3 years, and I was a serviceman on-call 24/7 for them.

My last service for MultiStar600 has happened in 2006, Winnipeg. I did not make a copy of installer CD or floppies, understanding the time of hardware RIPs is over.

I have two relay boards (as a source for spare relays) with burnt wholes at the place for Main motor relay. Incorrect calculation to get a proper relay type (contacts load of the current) caused fast spark-worn effect, overheating, mechanical clinch and final fire. The first symthom was unstable...

It's time to replace Main motor relay ASAP

And I look forward to hear next bad news: "our bottom relay board at that sandwich burnt with a smoke and smell allaround"

Farshad, you could guess that's AgfaLine machine by the error message " motor running slow" Main motor Encoder Optocoupler issue. (IMHO)

Me either :(

Every morning after weekend, ecpecially long weekend, you'll push much more efforts performing Power Cleanings, wasting your ink you paid already for plate production. No gifts from Ep_soon! (no smiles)

He is from Bulgaria, ansoft. Be smart - use GOOGLE! :)