Search results

I would hate running an NXT for that volume. I ran 5000 #10s the other day and it felt like it took forever. The printhead on the NXT also constantly needs cleaning or I get voids.

Are you using a hotfolder, or printing from the driver?

We use Quite Imposing after InDesign outputs the VDP 1up.

I dunno if it's a California thing, but damn near every political mailing went away for us because everyone wants a union bug now. Not complaining, since political clients are the worst, but you might want to not get too invested before you realize you can't print anything because they want to...

Yes, that's the correct ink from Addrex. Printware's ordering page shows the same inks for the classic and the nxt, so they should be the same.

I would guess they applied a coating that inst allowing the toner to adhere. I don't know Ricoh, but on my Canon I'd probabaly tell it it's 100#T so it uses the secondary fuser for better fusing.

We have the nxt.

https://www.addrex.com/rena-ink-supplies.aspx I also used that printhead without issue as well.

The ink is not chipped. We buy Rena branded Ink without issue.

It printed fine on my Canon. Sounds like your RIP isn't set up properly.

My tech gave me his old toner vacuum. It's this model: Buy Omega Supreme Plus HEPA Vacuum - Atrix I'm not sure if it's a fire hazard, but toner is too fine for standard vacuum cleaners, and it'll just blow the toner out of the air filter and go everywhere. Not sure what to use on the transfer...

No idea if it's in your price range, but you might want to look into sheetfed inkjet. https://csa.canon.com/internet/portal/us/csa/products/production/sheetfed-inkjet-presses-color I know Konica also has the KM1 AccurioJet KM-1 | Konica Minolta

I would just leave the color called out as 282C and use Fiery Spot on to color match the swatch. Should only take a few minutes.

You might want to look into this: Ghent PDF Output Suite 5 compliancy and instructions PDF X/4 compliancy should eliminate any issues with transparency.

If only someone had invented a way to store power for a later time. I guess that's just science fiction.

NCR will make the copy room stink for hours after I run large batches. Certain cotton stocks will make the room smell sweet as well. If you're running shells you're also gonna have fumes from whatever they put on the press sheets as well. I'm not sure if it's harmful, but ventilation wouldn't be...

We have a C750, and a 10000. I guess I'm spoiled, but I would rather be down for two days on our 10000 than run anything on the 750. Absolute garbage front/back registration, constant "adjusting", and it loves to jam on the simplest media. I hate running it. Unless the 810 has some massive...

Oiling helps, but punching plastic usually causes flare out on the final sheet.

It's essentially the exact same tech though. No heated fusers and the same downsides. You're technically correct though.

If you use poor quality paper or run a lot of NCR it can significantly reduce the life of the OPC. We have a 6320 that uses the same tech, but you can manually clean it. Are you not on contract for parts?