Search results

You said you design in CMYK. If you allow InDesign to convert to profile on export and the embedded profiles in the images are different from the output profile it will change the CMYK values of the images. If you setup the color settings in InDesgin to match your output, you mentioned Gracol...

We have done some of this in the past. While this might not be the easiest method, I've found that taking your CieLab readings from your spectro and creating Lab swatches in InDesign works well for me. You can then choose an output profile appropriate for the conditions the job gets printed on...

Yes, that's what I'm referring to. I understood him to say that yes remove the top or the bottom collar altogether. He said they had a couple of installs that had trouble with too much gum on the plates and this is what they did to resolve it. Note: I don't have experience with doing this. I'm...

I'm not sure if this is pertinet to your machine or not. We have an Azura C95. On the ends of the top roller there is a white plastic collar that runs in a groove on the bottom roller. When our tech installed he told me if I have problems with the plates not cleaning up I might have to remove...

I've been running Signa 4.5 on Windows 7 Pro x64 for several months now with no serious problems thus far. I don't have Pre-Press Manager so I can't comment on that. Steve

This has been a very interesting thread. We are installing a new CTP device in a couple of weeks and I had been tossing around the idea of creating a linearization/plate curve first before I recreate my press curves. My old device did not have a a linearization/plate curve applied, just my...

I installed Signa 4.5 and CS5 on my new Windows 7 pro 64bit workstation a couple of weeks ago. So far I haven't had any issues. I don't have cockpit so I can't help you there.