Search results

  1. L

    Prinergy 8.3 Workshop Quick Question...

    Thanks! I'll have to check it out!
  2. L

    Quick "bump plate" question...

    Hi all! We're printing this big solid (PMS) blue pocket folder and it was brought up that we should do a bump plate. Now, I haven't done a bump plate for many years and the pressman asked for a 90% and a 10 or 20% tint plate. From what I can remember, the original plate needs to be 100% and the...
  3. L

    Hohner 48/5 S Stitcher Head question

    As a prepress person, this is not usually my task until the new owner asked me to look into it. We are looking to get replacement stitcher heads for our Horizon Collator. The heads are Hohner 48/5 S. I've found a number of used ones on eBay for around $420. Problem of course on eBay is you don't...
  4. L

    The Re-quote Process

    Let me ask you a question...Your pressman and bindery person (the die cutter) have nothing to do. A job comes in that you print every year. A new owner comes in and finds the job under-quoted by their estimation approximately $400. The customer balks at the increase. Would you not take the job...
  5. L

    Prinergy 8.3 Workshop Quick Question...

    Does anyone know if there is a Workshop Client available for Prinergy 8.3 on the PC and will it run on the newer versions of Windows? Thank you!
  6. L

    Prinergy network question...

    Let me start at the main issue and see if something's wrong in the settings setup. For some reason, every few month's something goes wrong with the network, and some computers in the workplace lose their TCP/IP settings and I go in a fix them. Easy. This is now happening to the Prinergy Server...
  7. L

    Prinergy network question...

    Quick question. Do you have your Prinergy server set up for internet access? I've never had to before that I know of but the last 2 months I haven't been able to start Prinergy because it "Can't verify the license". This has been happening at the first of the month. Today, I couldn't login to...
  8. L

    Can't find Preps License...

    Thanks for the response! Apparently it was either just turning it off over the weekend or the restart but Monday everything was working...go figure...
  9. L

    Can't find Preps License...

    Okay...long day... Came in this morning and started Prinergy and it had the error message that it "Can't verify Prinergy License" and won't start. I've had this message the last 2 months (always on the 1st of the month) so I go under the License tab and go and retrieve the license and hit apply...
  10. L

    Font Management

    Looked at a previous thread but didn't find a conclusion. I Googled what people were using as a replacement for Font Explorer and most were designers that only use a few fonts whereas us in Prepress using many. Has there been a consensus of opinion on which is better? I'm finally planning on...
  11. L

    "Less than" digital color management question

    I call it "less than" because I'm sure you'll probably respond by saying "why would you do it?" but I'm just curious. I've been out of the loop on color management for 14 years now because my production manager/ former press technician did not see eye-to-eye on how to profile a press. My...
  12. L

    User Preferences in Prinergy 8.3?

    Where did you find that window or does that only come up when you have Preps open?
  13. L

    User Preferences in Prinergy 8.3?

    This may be a lame question but can someone tell me where to find the User Preferences in 8.3? I've been trying to get my Preps to work again but not having a lot of luck. These are the messages I'm getting in this order. This all started after we changed the router and had to assign new IP...
  14. L

    Fiery for Konica Bizhub 1060 can't see network

    Have a problem that perhaps someone can give me options to try. We have a Konica Bizhub 1060 with a Fiery running Command Workstation 5. We've had a number of issues with conflicting IP addresses lately but this wasn't one of the computers with the problem. We have an employee that recently went...
  15. L

    Prinergy 8 Enable Gray Overprint

    Just a quick question. Enable Gray Overprint. This is a default setting in Prinergy 8. Is anyone using this or are you turning it off? I had a file the other day that the customer had a gray illustration on a black background that overprinted. I had to go into Pitstop and tell it not to...
  16. L

    Prinergy 8 Trapping Question

    Hi all! Does anyone know if there is a setting that I can change to have Prinergy ignore trapping settings set in the pdf? I'd feel much safer if I let Prinergy trap my files than some customer setting their whites etc. to overprint. Thank You!
  17. L

    Prinergy 8 and Black Overprint Issue

    Called Tech Support at Kodak and we determined that I'm an idiot so please disregard this post!
  18. L

    Looking for an Inposition Program

    Thanks for the correction! I thought it looked wrong....
  19. L

    Prinergy 8 and VPS question...

    No spot color. VPS set at 2450. I know that's high but that's what we've been going on for years on EVO.
  20. L

    Looking for an Inposition Program

    A customer asked me the other day if I knew of a good Inposition program and could recommend one to him. He was currently looking at Inp02. Since I've been using Preps my entire career, I really have no knowledge of what's out there. Can someone vouch for this program (I believe it's an Acrobat...

PressWise

A 30-day Fix for Managed Chaos

As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line.

“We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month.


Learn how…….

 
Back
Top