Search results

I remember this error from years ago - I think leaving it on would warm up the bulb. Have you: Tried switching to scanning transparencies and then back again? Switiching Topaz off and restarting after 15 mins.

We had a similar experience with Xerox NeverTear 270 micron and our Xerox 700. Our 1st side out was washed. 2nd side out was fine. Running the stock through as either 90 gsm uncoated, or 170 uncoated gave better results. This was because the 2nd BTR was dropping voltage in-between sheets when it...

A couple of codes and what they mean: EO = emulsion out RR = Right Reading

Heidelberg uk should sell you a couple for £60.00 + VAT + shipping. I have a full unworking Herk here in Scotland, UK with numerous spare parts if you want to buy the lot :)

I don't know about FreeFlow, but there is an option on Creo for Preserve pure CMY colors. If no option exists, try turning off all color options 1 by 1 until you find the culprit.

I'll take one too :) UK though

I'm not familiar with this densitometer, you need a spectrophotometer to measure tints printed digitally, as there isn't the same screen as with Litho! We use i1 - x-rite

This happens with us intermittently. From memory - I think you can go to Start Menu - Fiery Remote Scan and check/change the settings there. I don't know if it's an issue with the Fiery software or Windows.

The error message is v unhelpful: PC 0x4E565E56 SR 0x00000000 SSP 0x0009e26a Any ideas?

Thanks for the update LoWang I've copied the floppy to a PC, duped it using WinImage and inserted it back in. Looking at the output from VT100, I get quite far in the boot sequence: Loads 590K into RAM and loads about 6 files: Errors.txt default.mat etc and then fails with an address error :(

Same issue here - Anyone know the VT100 settings for Hyper Terminal? Thanks Dave

Are u taking the pith?

How much were you quoted for XMPie? I heard it was in the £3K-4K range

Fortunately, we don't get this much. I agree with airyk. Raster at 150 dpi, not 300!

Excel Excel Hi David Any chance of a copy? Minus your prices of course!! This is exactly what I'm looking for! Thanks Dave

What are the distiller settings you are using?

Inkjet Inkjet We still output film using our 16 year old herk. But are testing film output with our canon 8000. The film is called novadot surejet. We image a 1 bit tiff on our harelquin her rip and output this to our canon. I've not got the tints right yet. But think we can achieve 150# Hope...

Haha. Good follow up post. V amusing! I don't know ECRM Imagesetters, and have only worked with 1 Herkukes (v1!) If the dot is seen in the preview. Then it has nothin to do with the imagesetter. By settings, I didnt mean job settings, I was meaning screen and or page set up. What happens...

Surely there are some good old timers and bad new starts. Conversely the opposite can also be said It's about attitude to learning and doesn't matter if you are young or old. I've worked with all four kinds!

Tint in solid Tint in solid Hmm. Can't be anything to do with the imagesetters laser if you see it in the preview Sounds like conflicting settings. Does this happen when you are ripping a single colour job? I would go back to default settings for everything and see what happens! Good luck!