Search results

Bought a Toko 4750, got running, then it quit. Delivery table switch bad, bypassed it for testing, now when you push ready button, press motor runs no matter what position lever is in, turn button loose, it stops... any ideas? Something's shorted somewhere. Hey, it first quit, tinkering around...

Elliptical - is not your problem. . . Elliptical - is not your problem. . . elliptical dot shape is best for "skintones" Since the 60's when someone came up with the elliptical dots, it has smoothed out the middle tones in practically all types of printing. . . does things that are hard to do...

Hp 5000 & 5100 Hp 5000 & 5100 We will support anything you need for the HP's - both of which will make excellent poly plates. Welch Industries - 770-474-1150.

I use process blue and medium red only one or two days each month, is there any way to keep them from skinning over in the can? I throw away about half as much as I use each issue. . .

Sorry for being so brief. - The HP is a money maker for small shops if you'll take time to understand it. It has 2 speeds to print, a "fast-res 1200" that's OK for paper etc. and a PRO-RES 1200 that runs half speed, this MUST be used to fuse image on plates. Again, read info on my website...

First of all, you must have the 5000 or 5100 PS installed, not PCL version in order to make plates. Go to welchindustries.com - left column find HP5000 printer-platemakers, there is information there that will help also. You need a "print preset" defined for Indesign, something similar for...

Just noticed your post - if you will call me I can help you. Thanks Lamar Welch 770-474-1150.

Agfa 1000 - Agfa 1000 - We have an Agfa 1000 - w/Mac - Viper 3.04 rip.- G & J Film Processor. Is there still any market for these? Have on ebay but no action on it at all... Thanks!

Got it... Got it... We got the Agfa working --- was as simple as installing it as a printer on our PC -- then printing the job as a PS file, copy to a disk, then run that file on the Mac-Viper to the Filmsetter... Thanks L W

Viper-Mac-PC Viper-Mac-PC I've tried exporting to oldest version of PDF w/ ID CS3 - no dice. How could I create a virtual printer on the PC for the Viper? - that would be by far the better way, don't know where to get drivers or whatever is needed.... ? Any help would really be appreciated...

I bought this machine used, images test OK, also imaged a PDF from the internet, but a PDF generated in ID CS3 won't do a thing... it acts like it's gonna send it, but nothing happens. I suppose I'm generating a later version PDF or something... anybody can help? Thanks!!

Have a APS 6/82 ACS hooked to Mac G3 - Viper 3.0 Rip -- we work on PC's w/XP - Indesign. What is most reasonable (but good...) way to connect everything, have a wireless network from another building, usually works, but rather not use it if possible. Anyway to connect w/cable? -- Is it possible...

Considered Poly plates, HP 5000? Considered Poly plates, HP 5000? For most jobs, you can do excellent work using the HP 5000 Laser and polyester plates. . . see hp5000platemakers.com