Search results

I dont have access to the work system now but, lookign at the video when you are putting the grip edge of the plate in the clamp it is coming up with the error and not closing the clamp? if this is the case most likley it is an error sugeting the plate thickness is too much or too little...

Do you have the full error message, ill try and see if i can access the work computer from home to check the digidocs

B3 Plates would be around £2.50 Each So X 4 is £10 (you can get 2 A5 Jobs Work and turn so split that in 2 if you are ganging) Ink difficult to work out but if you call it £10 per 10K A5 you are covered. So now, work out if you can better money printing it or buying it in dependent on how...

Ok i will rephrase im not keen on having water in the ink rollers;);)

Regarding the Integrating roller, i do not use it, i am not keen on water and ink mixing together on the press, i think it is to be use during heavy coverage jobs but am not 100% sure on that. Your machine should run ok without integrating the rollers. Regarding why it disengages on the fly i...

Try it with it off, i personally have run my machine with it on and off and when i am not using the split i do need to throw more sheets away at startup. Is you problem confined to one unit or is it all of them? Are you running with your water integrated or not? I would obviously first check...

Are you aware that the 'Ink unit split' on the Roland refers to a Ink roller part way down the roller trainer that comes out of contact when you are off impression so that you dont need as many startup sheets when you start printing again. The Feature you are talking about is whether to run the...

I thought the 300 plate size was 605X740 wasnt it?

If you are looking at buying this machine, i know the owner and can put you in contact if you are not direct.

Have you checked there is no oil error when the siren rings, or does it not have any other error when it does it/

what do you mean by turning drums? how is the fact that the 2 are so close causing the sheet to slit? are you sure your pressure is set right, or your are using the correct rule?

If your Printing a 25% Dot, and it is printing as a solid, their is something hugely wrong, and i would suspect it to be a serious mechanical problem.

I mean this with as much respect as possible, however your saying you are responsible for the maintenance team yet you dont know what the bearers are on a Press?

Have you tried throwing some cobalt drier into the ink? and abit in the fridge

Our guys use Metering roller cleaner

Dont forget to check if the building has ample Electric supply aswell.

Hi all. We have a lotem 800v, i think it is a 2000. We need to output plates 520mm wide however the Pins that kiss the front edge of the plate need bringing in a bit to match the plate size, does anyone know if this is possible and is how? sorry some of my termonology might not sound right, but...

Where are you Rebmit.

i cant see that man will stop manufacturing presses, it just wouldnt happen, someone will stp in at the last minute and take it over

Or, buy a press with one touch plate tensioning, which tensions the back edge of the clamp with on spring loaded bolt