Search results

hi when i print custom size 12.9"x25" machine dose not print continually. one print at a time , when i print more than one the second print(paper) jam. only one sheet i insert in bypass tray the print will come. i insert one by one sheet then press START button. its take much time if i print...

Please mail Me at : [email protected]

How often do i perform color calibration on Dc 250. Monthly Volume is 30k (85% 300 gsm 12x18) Calibrator is dtp 32.

Once a month. with DTP 32 i think it a hardware problem not a Software..

yes I Understand Thank you...

i know all the things... i replaced New IBT Belt, all 4 drum Units... but print is not smooth as before... 35% light cyan print come like Clouds in the sky... on the paper click only 200k in 6 months... 3 Toner set Per month may be 1st BTR Roller have problem, its a CRU ? May Be ROS..

hello what is the life of Trickle Charge Developer in dc 250 machine in normal condition.

what is the major difference between km c500 and KM 6500 print quality ? variety of paper handling (texture paper, 300gsm cards) ? Technology ? & Consumable ?

You can go with Refurbished Dc 250 its a good Production and easy machine. i already use it. i am happy with it. depend on your Monthly Volume.....

4500 Pound

I am not talking about re-print .. i am talking" Riping while printing" i want to save time.. when i print about 500-600 HW card print. riping process is not working while printing about one hr.

you are right.. but if u have 2 same machine, you don't get advantage of two technology. all machines have many advantage and disadvantage. If your customer want something deferent from your current machine print, you can print on another brand machine, may be your customer satisfy with that...

i Have a small Printing Shop Volume about 50K currently i have Xerox 250. i want to add another one machine. i m confused between Refurbished xerox 250 & KM 6500. main issue is Mantinance Consumable Cost Color Smoothness Xerox 250 is Mantinance free machine bcos it have smartkit. i rarely...

I Already working with CWS 5.2.0.46.. if i print a job about 100 prints. printing is going on. but at the time i right click file to Process & Hold or Print and Hold, this job shifted to Process Window and can not be Riping, it is show "WAITING TO RIP" until First printing job is Done.... may...

i have 250

hello... i have dc 2045 with EFI EX2000. when i print a job, the message appear on machine " RIP Subsystem Fault " and machine can not print.. until i restart Fiery.. this problem show again and again.. please help..

Hello i have dc 240 with EFI bustled controller, can i do RIPing & printing simultaneously, if yes , how ? Thank you.

I have One DC 250 and one DC 5252, dc 250 is an elephant, 250 is very reliable and easy to use and mantinance free machine no fuser oil, no charge corona, print quality always same in in-out even u interchange all three drum module. fast warm up time. speed is fast in 12 x18 300gsm then DC 5252...

Problem Solved after replacing the Hard Drive., that was the software problem in fiery.

i have dc 250 with in-built fiery. when i RIP a Print Job than Fiery is restarted and Massage appear in Command workstation is "Please wait Trying to connect in 250s-0s) after few minutes it will be ready to print but again all the things happened. again and again , if i do direct print the...