Search results

I am in the same boat and very interested in the Duplo 616 OR the 618. I know the 616 maxes out at 350 GSM and the 618 maxes at 400 GSM. Any other huge differences or concerns one way or the other? Agreed with BigSi a used model for either vs the ridiculous cost of a new one.

We have a Xerox Versant 180 and are currently running a 12x26 sheet for a 6-pager, stock is uncoated cover 200 GSM (under the max 220 GSM), and the sheets are jamming every 5-10. Most of the jams occur in the fuser section, the other jams are in bypass tray when feeding (easy to clear). Any...

We are currently running a 12x26 sheet for a 6-pager, stock is 200 GSM, and the sheets are jamming every 5-10. Most of the jams occur in the fuser section, the other jams are in bypass tray when feeding (easy to clear). Any suggestions on how to get the sheets to print a little easier? Sorry...

We have Versant 180. Just talked to our service techs about some parts issues and they mentioned the toner problem. They explained to look at your toner date codes on the sides of the boxes. Techs say do not use any 2021 toner made before march 1st 2021, would be a julian code of 60 (see...

Can anyone give me a rough cost on the Mach 6? Just looking for a ballpark, thanks.

Does anyone have the operation and maintenance manual for a Vastech 3-Bath Online 1020-014? I looked online and could not find much useful information about maintenance, chemicals, etc. Thanks in advance for your help.

will check them out thanks.

Yes, Boggs/Wired bids is always a great starting point. My issue buying a used cutter and finding someone to service it. Apprecite it thanks

We are currently looking at a small hydraulic cutter for our print shop, and wanted some opinions. First our shop equipment and cutting needs. We run both small offset presses (AB Dick QP25 and 9985) and digital eqipment (Xerox Versant 180 and Ricoh 8100). The majority of our sheets are...

We have a couple of AB Dick presses that need repair help, a 9985 and a QP25, and we are located in Erie PA. Looking for contact information for repair people from Cleveland, Pittsburgh or Buffalo or anywhere in between. Thanks in advance for your help.

Just curious which Aircare unit you grabbed and if it is still working OK. We are looking to solve humidity issues for a xerox V80, and it sounds like the responses have been pretty helpful. Our shop is about 2500 square feet

Our AB Dick QP25 stops dead of it's own accord quite frequently with the control panel display reading 'Emergency Sw Trouble'... Anyone else had this problem? We have tried to take off the safety guard covers to see if something was tripped, no luck. Anyone else have this problem or a...

We got rid of our 700 in June and switched to a C75. I would have loved the J75 but not worth the added cost given our clicks per month. The 700 struggled with the heavier weight stocks but the C75 has no problems with the stock up to 110# uncoated cover. The machine we have has the decurling...

We installed a C75 at the end of June, so far so good. It does nice job on color and registration on the Auto-duplex, which goes up to 110# uncoated cover i think. Faster than the 700 that it replaced for 100#gloss cover. We have the decurling unit with our unit and it does a nice job on...

check out the RB Sun Enterprises slitters. They have a few different versions (with and without gutters, 10-up and 12 up) and all are cost effective. The machines come with two parts, one to do the initial cut (cards in strips) and one to finish the cards. The machines are connected and slide...

We just finished looking at several different small format UV coating machines, narrowed it down to three: TecLighting TRU16, Kompaq Ez Coat 15 and the Als UV/American UV 20" (PSC20 1/3d). We considered about 6 different machines and narrowed it down to these three. Two machines, the Kompaq...

I was doing some research on business card slitters and hoping to ask the group for a recommendation. After reading these posts i think we have a few options. First, what we have. Currently run a Xerox 700 and looking at a Ricoh and Xerox to replace the it in the next few months. We also...

We are currently looking hard at the J75 but are considering a Ricoh or KM machine TBD. I really like that we can do some replacement/service ourselves on the Xerox (currently have the 700 and like that aspect a ton), i believe that is an option on some Ricoh models but not sure about the KM...

We are a mix, could be super small runs and could be 1500-2000. Probably caught between the two for an average run of 200-300. I really like the Kompac but the 15 seems REALLY small, maybe you dont need that extra drying space/length like the Duplo or Tec but not sure.

Did you look at either the duplo or tec machines at the show? Just curious what if anything you remember about those devices.