Search results

Check for something simple, the fans to the right of the crate might clogged with debris and may not be working at all. Hope this helps.

problem in the tcpip (smit) something with the host name or tcpip address

Hello Bayo....It has been several years since I looked at a brisque. There is a setting (ver4) I can't remeber if it is in smit or scismit in which you can change the size of the minimum rip space. There is also a file in the aix that can be change too. Like I said, it has been years since I...

Hello Barry Those were the cables I was talking about. And yes the laser will fail if the spinner is not turning. One more thing to check out, although it might be a long shot. The PC assembly were are the board sit in, in the back thre are two fans. Make sure that thet are free of debris...

Hello Barry......If I remember correctly, there are two data cables connected to the dynamic optic on the home side of the Dolev. Disconnect the two cables and boot the machine. If the breaker does not trip then the problem is in the dynamic optics. Good Luck

For the Lotem, make sure your lens is clean, also with the resolution test, make sure that the white area in the bottom of the calibration strip is free of lines, you can only see this with a loop. Kodak response center will tell you to look at the vertical and horizontal lines and make sure...