Search results

We are about to have a Ryobi 520 press installed and have just purchased a used DPX CTP system using ECRM RIPMate v7.2 which came bundle with Ryobi IVS. The DPX system is producing colour separations perfectly & IVS is creating the ink key presets however I haven't yet figured out how to add...

We have 2 fully working QMDI presses being decommissioned. All parts available including upgraded diameter ink fountain rollers at competitive prices. [email protected]

I've no experience with the QMDI Pro, however if it uses either windows XP or 2000 instead of DOS it should be easy to retrieve username + Password. Plenty of tools such as Ophcrack are designed to retrieve windows passwords by booting to a CD instead of the hard drive

We are currently developing a new website we would love any Tips / Advice you might have. Also links to other websites to view samples of content would be great. Sparksincolour Print & Design - Home Thanks Andy

Hi Guys, We aren't trying to advertise however we are currently developing a new website at the moment. We would love any advice or even to view others websites for ideas? Sparksincolour Print & Design - Home Thanks Andy

We currently do all our printing on a 1997 QMDI classic and we are delighted. The quality of the plate making it outstanding. The work we are producing looks excellent and is very comparible to any other 4 colour printer. There are of course limitations for example as you mentioned its portrait...

Hi dave thanks for the reply I have all posts in the thread you sent. (although this is a QM46-1 not the QM46-4 and doesnt have walkway etc.... cable to motor is different) I believe the encoder is connected coorectly as I can see the current press angle. Thanks for the information and I'll...

Sorry Stan I somehow missed your last post. To update the thread an engineer just sent me a new MRK board which made no difference. I am aware of 3 problems. (Possibly not all related) - Main motor will not switch on "Inching" or "production" (LED on button does not flash) - Pump for blast...

Just back from the press and reporting back. The error 11-05 I don't believe to be an issue as it disappears at pressure, however the other error 15-01 I have double checked the manaul and can confirm it is apparently a MRK error. SF56 only repors 15-01 and no other problems, all guards are...

Thanks for the reply error 11-05 disappears when the press approaches the correct pressure, once disappeared the light to start blowers / suction starts to flash and there is now no other errors in conjunction with 15-01. I have been hand cranking the press to check cylinders / rollers etc...

Thanks I'll take a look at where you mentioned and post any updates.

I've now removed the "Y4" device and blocked the hose outlet to prevent loss of pressure and there is now no leaks. However the needle on the guage is sitting about 2mm below the green section where it is then letting any further air out through pinholes around the adjuster knob on the top of...

Thanks for all the replies, sorry my previous reply was incorrect although my gauge is getting into the green area the compressor is not switching off I assume its never reaching the correct pressure? Also I can hear air leaking out of Y4 (non operator side). Could this be the cause of this issue?

I can confirm air is deffinetly getting up to pressure in the upper area of the green segment on the gauge. If you have any other suggestions they would be greatly appreciated :)

I'll take a look this morning however I have watched the gauge going into the green area it seems to have to get up to pressure before I can attempt to switch on blowers. I also think error 11-05 appears when not up to pressure but disappears when the gauge reaches the green area

Hi, We are having problems with a press we've just purchased, any help would be greatly appreciated. SF 56 brings up error code: 15-01 All guards seem to be closed and the switch can be heard clicking once closed, no lights are illuminated on the SVK2 board. I'm lost, as the press was...

We always ran our plates through a HP5000 until it eventually died. We were kind of stuck so decided to put a plate through our Xerox DC12 which achieved very pleasing results (so we never replaced the HP). We've been running polyester plates for years without any issue and because of the heat...

Thanks guys for all the information I'll give it a stab I just didn't know it had to be run manual mode However we've had it feeding envelopes independent of a printing press and it seems quite simple Andrew

Thanks for the info! Once setup are these envelope feeders reasonably good / realiable? I only ask as this is our first dedicated envelope feeder. Thanks again for your fast reply!

Hi, I'd really appreciate any help from people with experience with this envelope feeder. We have two Heidelberg machines we want to get working with the AB Dick 1200 envelope feeder(QM 46-1 & QMDI 46-4). We bought this envelope feeder a few years ago and it has sat in storage till now. I...