Search results

Yes the GUI show the OLP photo, but not show parametar setting on OLP, for example, the temperature of developer and fixer. Also, I alredy change the smal pcb at the bridge with another taken from other primesetter wich work good, but in my primesetter is the same error.

I was alredy do, but the error is still here. I changed Infra Red plate, but the problem is still here.

My Primesetter doesnt see onlince procesor (Glunz&Jansen), on GUI I have error 74 Online developer not ready. But online processor is ok, temperature on developer and fixer is ok. Everything is Ok, but primesseter doesnt see online processor. Any idea?

I know that Delta tower work with delta rip 7.5 on NT 4.0 - sp6a, but delta rip 8 work on win 2000. Anyway, how much will be cost staff that you have. I'm from Macedonia

I need to replace Deltatower with Metadimension rip, to conect my Hercules pro Imagesetter, but I need pci card called Speedway taxi. If any know where I can buy that pci card and how much will be cost.

I have a problem with dotmate7500. It's work fine during imageseting, but when film start going to the processor, it's stop right in front of the entrance of the processor. The processor all the time is in stand by mode, ready to work, but film is stuck. Then I must open dotmate and pullout that...

I was instal ripmate 4.2 on win XP-sp3, and work perfect, but must have old PC with 2 serial and 1 paralel port and ide hdd

Okay. Say if you have such a card and tell me if you sell, and what a price. You know I need that card to install EagleRip 4.x version

I have an imagesetter Scitex Dolev800 with Eagle Rip 2.3. Interface card, I think, is LP2000. To install Eagle Rip 4.x I need creo DBI interface card. Is anyone know where I may found that card.

1. Did you try to update the software from GUI, you may read in GUI help how to do. 2. Maybe is not enought good contact between cassette and primesetter, try to clean trrafo on cassette (big circle on bottom on cassette) and circle on primeseter, maybe is not enough electricity to power up...

I have an imagesetter Scitex Dolev800 with Eagle Rip 2.3. Interface card, I think, is LP2000. To install Eagle Rip 4.x I need creo DBI interface card. Is anyone know where I may found that card.

Da, mozes povezati externi monitor, ali moras i tastaturu. To mozes uraditi na zadnio deo doleva, dole, gde se nalaze ostali kablovi. Konektori su kao na PC-u. Ja sam to radio nekoliko puta i sve radi bez problema.

I will by from you that machine dolev 4 press for 500 euro

Is Xitron navigator or ECRM 8.3 work on Scantext Apollo imagesetters?

Thank you. I wonder is ECRM rip work on Dolev 800v

I think is no mater where I am, and a don't need reseller, only to know which RIP to use.

Do you have a suggestion which RIP can I use on my dolev 800v?

First you must stop the RIP, then you go to "navigator" menu, choose "Configure RIP", then choose "Extras...", in Extras choose "Simple Imposition", then choose "Add" and type licence number 4215646. Close all menu. Go to "Output" menu and choose "imposition manager" and with "copy" menu choose...

Did you try to put serial for "Simple Imposition". If you no, here is a number. In section Simple Imposition put this number 4215646 and I think will be OK.