Search results

Your press manual should have a specification for the coating blanket size - on our 105cm press we use the same size blanket as our printing plates, but for our 142cm press the blanket is actually 6mm shorter. You will have to do some testing on press to see where the coating image needs to...

ricreis394, It looks from your picture, that you are using a "sticky-back" plate material, then mounting it to aluminum plates, back printing the image on press and then cutting our your coating patterns - the same procedure recommended in our KBA press manuals. We had done this in the past...

Wolfstouch, Your CF2 needs to come from a manufacturing layout (what it is called in ArtiosCAD). Your CF2 shows one position instead of what I assume should be 16. Your CAD operator needs to step this in a manufacturing file and NOT just copy/paste like you would in Illustrator. This is not an...

You can purchase clear media with leading edge in white - check with your consumables supplier. We've also taped a 12"-18" strip of white paper to the leading edge (white must be same width as your clear roll and it certainly helps the more straight you can get them taped together). Key being...

Sounds like a good idea. Does the device give you the option to skip the bridge? i.e. can you manually unload the film/plate and go directly from the image setter to the processor, eliminating the bridge?

If you're cleaning the processor daily, it certainly doesn't seem like the issue should be in your processor. Does the line go in the feed direction? I'm not really too familiar with your device, but if it goes in the feed direction, is it possible there is something on the drum of your...

Hi Bill, not sure which version of Prinergy you are running, but if you're getting a message about pages containing transparency and pdf being flattened with both APPE and CPSI, I'd take a look at your refine template. In the normalize section, there is a setting for PDF level handling. To keep...