Search results

You can try to make darker blacks by turning the default density down a click or 2. It's found in service mode under Process-->Drum peculiarity-->default density.

That Fiery Stand/worksurface is pretty bitchin' Any idea on freight cost to Southern California? I have a few customers that may be interested.

This here, if you are really desperate to change them early you should find a tab on the bottom of the holder that if you pry downward gently, it should release the cartridge.

I have the patch you requested in your original post if you can message me your email address.

When you did the reload, do you know what software version you loaded vs what was previously on it? The reason I ask is because to upgrade from ver. 1.0 to version 1.11 requires a bios update too. It is sold as an upgrade kit p/n 45126142 (no longer available). Also make sure that both service...

What does the digital display on top of the controller read? It should be at "00"

What type of controller do you have? Is it the small one mounted on the back of the machine? Or a desktop console type?

The way they designed it allows the more expensive "L" toner to fit in the non L machines. They keys, and keyways, are in the same location on the bottles and machines. The difference is the thickness of the tabs. L series machines use thicker tabs on the machine that only allow the wider keyway...

TN-620 will fit both "L" and non "L" models. TN-619 will only fit non L. Contents are identical.

The C12000/C14000 is the first generation of that particular engine. There will be plenty of bugs to work out. There has already been a gaggle of firmware updates to address issues. Each update seems to improve function and reliability. Hopefully it works out and doesn't become another case like...

I've never tried it myself but have heard mixed results from other techs. First you will want to measure it out by weight. DV-613 is a much larger volume bag than DV-614. While I'm confident that the steel powder base is the same, the toner mixed in is different. I have heard that it will...

Code C-E008 Classification Main body: Output paper density automatic adjustment abnormality Cause An error is detected during the output paper density adjustment. Measures to take when an alert occurs The main body and the option stop immediately. Estimated abnormal parts • Color sensor unit...

Where are you located? I service production Konica equipment in Southern California. C-4505 is a yellow skew position out of range which can have a number of causes. C-9401 sounds like a failed lamp or inverter.

Yes, Lee [email protected] Unit with IQ is tentatively sold.

Hello, I currently have 2 Accuriopress C2070's listed on ebay if anyone is interested? Off ebay price is $2,000 off the listed price. I would prefer to sell local to Southern California but will work with shipping company of buyers choosing. Freshly refurbished off lease machines ready to get...

Have your tech try adjusting the tension spring on the back of the DPFR assembly. If that doesn't help, he may want to try using the orange "pre-printed stock" rollers designed for the old 1050.

Sorry for the delayed reply. Yes, replace the dev unit. After several million impressions the mag roller can get too smooth to properly control the flow of developer over it. Also conductivity for the developer bias can lesson causing a lot of toner misting.

Mechanically the EF-103 is the same as the regular fuser. The only difference between the 2 fuser types is a short wiring harness between the top rear connector and the temp sensors. You can easily convert an envelop fuser into a standard by swapping the harness out (good to know in a pinch)...

Developer/developer unit fatigued. Also, the cleaning input shaft can get worn causing a loss of ground to the cleaner brush. This does not look like a failed cleaning blade.

This here. The C258 is a very small office duty MFP. It can do heavy stock as a page here and there, but not continuously. It doesn't have the means to keep up page after page with toner supply, fuser temperature and charges.