2-part and 3-part paper help

[TLawrence]

I am a rookie when it comes to press. No training like I stated before. When I run this paper its pulling two pages and then it gets stuck on the blanket. Any ideas. I have messed with air, pile height, all day long.

 

[inky]

I am a rookie when it comes to press. No training like I stated before. When I run this paper its pulling two pages and then it gets stuck on the blanket. Any ideas. I have messed with air, pile height, all day long.

I was self taught, over 25 years ago now. I may have said this before, ask around & get a bit of help to run a couple of jobs. It will save a lot of anxiety in the long run.

Ask your paper merchant or ink rep, someone always knows someone available for a bit of training.

 

[TLawrence]

I'm running a print master. Don't remember the name of paper. Regular paper it runs just fine.

 

[inky]

I'm running a print master. Don't remember the name of paper. Regular paper it runs just fine.

There are light weight paper adjustments on the feeder.

I remember downloading a great little document from the Heidelberg site on setting up the feeder.

 

[TLawrence]

where would i look?

 

[Steve Davis]

Common problem with NCR paper.......weather changes and the static arrives....I have tried numerous carbonless papers and have found that you get what you pay for......discovered that NCR brand is the best, even though the price is higher. I also installed a static eliminator in the air blast line to reduce the static. It can be found at Printing static|Plastic static|Auto painting static|Wood finishing static