Adjustment

[applep]

My Hamada 660 gets an image from the back head (with a plate mounted) on the front head (without a plate mounted). How can I fix this problem, is my impression cylinder out of adjustment??

 

[Albert Noel]

sounds like your blanket cylinder is over packed

 

[dana]

that press should run without packing, I would look at the plate to blanket adjustment. it's been many years since i've run one of those.

 

[Albert Noel]

dana
i stand corrected.
i dont have any experiance with that press but i know on our heidleberg qm46-2 when this happens its usually from too much packing under the blanket. i dont really know hamadas at all

 

[applep]

Dana & Albert,
Thanks for your input-I'll check out your suggestions-
Mike