Agfa 1000 - Viper 3.

[LWelch]

I bought this machine used, images test OK, also imaged a PDF from the internet, but a PDF generated in ID CS3 won't do a thing... it acts like it's gonna send it, but nothing happens. I suppose I'm generating a later version PDF or something... anybody can help? Thanks!!

 

[gicbelgium]

I bought this machine used, images test OK, also imaged a PDF from the internet, but a PDF generated in ID CS3 won't do a thing... it acts like it's gonna send it, but nothing happens. I suppose I'm generating a later version PDF or something... anybody can help? Thanks!!

Viper don't like PDF files

You should export your file from ID to an old PDF version (1.3).

The best is to print directly from ID to Viper.

Did you create a virtual printer on the workstation where Viper is installed?

Are you working on a MAC or PC workstation?

 

[LWelch]

Viper-Mac-PC

Viper-Mac-PC

I've tried exporting to oldest version of PDF w/ ID CS3 - no dice. How could I create a virtual printer on the PC for the Viper? - that would be by far the better way, don't know where to get drivers or whatever is needed.... ? Any help would really be appreciated.

Thanks! Lamar

 

[LWelch]

Got it...

Got it...

We got the Agfa working --- was as simple as installing it as a printer on our PC -- then printing the job as a PS file, copy to a disk, then run that file on the Mac-Viper to the Filmsetter...

Thanks
L W

 

[fareed1025]

need manual for viper 3.04, how to set up printer on mac OS 9.2.2 rip so i can print from my pc using corel draw