avantra30 control panel problem

[Dieudos123]

HI,
I have the problem on avantra30 imagesetter:
When I suitch it on the control panel doesn't display nothing at all.
And others parts look as they work.
Please I need a help if anyone can hep me.
Thanks in advance.

 

[VladCanada]

You are welcome!
But - no more free Professional Service Help from my side at open forums anymore!

 

[Armya Inc]

You need to have the removable NVRAM programmed, and 99.9999% of the time you wouldn't be having communication between UNIDIAG----DEC----OCP to do so.
If VLAD was there he would remove your chip and fix it, but he isn't.
you have to buy the whole unit for $1500.00+Shipping. Please make sure the display you buy have the same Firmware Revision as the one installed on your machine, otherwise you will be wasting your money. This is a service Tech Job.
Vlad can give you professional guide line and help you through with Avantra 30 Firmware revisions and the process of replacement online.
You also can contact your local Agfa representative and let them know about your problem.