Barco Megasetter or Imagesetter able to output 48x68 in.

[PressD]

I would like to know if the Prinergy 4.0 or Brisque systems are able to support
a Barco Megasetter can be compatible with my present systems or do I need to
invest another type system. I am replacing my Dolev 800 because I need to be
able to output film sizes up to 48 in. x 68 in. for screen printing and commercial
printing I also use Print Console 2.4 for one bit tiffs output.

 

[dj]

Well, Prinergy won't do a direct connect to a Barco megasetter. You need to get some sort of TIFF downloader front end to put in front of a BARCO.

In a pinch, a Harlequin with a LOT of RAM will do. Then have Prinergy send some bitmap TIFFs or bitmaps with a EPS wrapper to the RIP.

Cheers, DJ
Prepress Pilgrim