Hi everyone,
I am having trouble outputting a vignette screen to my image setter.
I am getting a lot of stepping in the actual screens.
Program: Corel Draw v12
RIP: Postscript Rip 50 Linotype Hell
Image Setter: Herkules PRO set up for negative film.
PPD Driver: Linotype Herkules Plate HQS V 3.7
The colour of this particular vignette is from 50% orange 021 to white. About half way from bottom to top of an A4 sheet.
When I go to print options it comes up with 1 problem with job: screening may show banding. Try increasing number of steps in screen...etc. I have tried all the solutions provided, but with no luck. And the weird thing is the job actually displays on the computer screen as banding (you can see the banding before printing!)
Please, some tech advice or fix on this would be greatly appreciated....
Regards
Darren
I am having trouble outputting a vignette screen to my image setter.
I am getting a lot of stepping in the actual screens.
Program: Corel Draw v12
RIP: Postscript Rip 50 Linotype Hell
Image Setter: Herkules PRO set up for negative film.
PPD Driver: Linotype Herkules Plate HQS V 3.7
The colour of this particular vignette is from 50% orange 021 to white. About half way from bottom to top of an A4 sheet.
When I go to print options it comes up with 1 problem with job: screening may show banding. Try increasing number of steps in screen...etc. I have tried all the solutions provided, but with no luck. And the weird thing is the job actually displays on the computer screen as banding (you can see the banding before printing!)
Please, some tech advice or fix on this would be greatly appreciated....
Regards
Darren