CP Bourg BST10

[LarryG]

Does anyone know if the board that drives the individual solenoids on a BST10, will work on a BT12 friction?

 

[chock]

Dear Sir:
Hi ,hope you are well
If the board printed has the same Number, can be compatible.
However Look in your schematic diagrams if the Voltage Input vs Output Voltage are
equal? the board can be compatible.example if the input for solenoid is +24vdc, the output of the board can be +24vdc.
Otherwise Not.
Let me know if you need more guide.
Regards
[email protected]