Hi
We have two Epson 9880 44" printers & one of them has a problem in that the head randomly clogs.
The strange thing is that it will be printing fine then about 1cm into a print, one of the colour's partially blocks. Normally running a head check on the printer sorts it out but it's becoming a pain. I have changed the dampers & run a full clean but still happening.
Has anyone had a similar problem & managed to fix it or does anyone have access to the maintenance manual that may shed some light on it.
Thanks in advance
We have two Epson 9880 44" printers & one of them has a problem in that the head randomly clogs.
The strange thing is that it will be printing fine then about 1cm into a print, one of the colour's partially blocks. Normally running a head check on the printer sorts it out but it's becoming a pain. I have changed the dampers & run a full clean but still happening.
Has anyone had a similar problem & managed to fix it or does anyone have access to the maintenance manual that may shed some light on it.
Thanks in advance