I NEED THE SERVICE MANUAL AMSKY AUSETTER T848

[CHAVEZ]

Dear colleagues, great day. I need the service manual for this CTP, if somebody can help me I would appreciate:

AMSKY AUSETTER T848

Thank you…

 

[ChrisZ]

Any specific problem with that machine? Maybe I could help?

 

[CHAVEZ]

Hi Chris, I appreciate your response. We set up a Kodak Sonora plate, but my customer has other problems, like how to replace the spring of the tail clamps, he has the springs but we do not know how to replace them. If you can help me or if you can share the technical manual would be great. Thank you so much..

 

[CHAVEZ]

Any specific problem with that machine? Maybe I could help?

Hi Chris, great day I hope you can help me. Thank you

 

[ChrisZ]

HC springs you just loose screws and replace them. Removing screws is not needed. Easier to do.

For TC springs is machine calling for 20000 replace?
You must have engineer dongle inserted to reset that counter. Otherwise machine will stop at 21000.

Still need help with that? I can elaborate later how to replace them.
Chris

 

[CHAVEZ]

HC springs you just loose screws and replace them. Removing screws is not needed. Easier to do.

For TC springs is machine calling for 20000 replace?
You must have engineer dongle inserted to reset that counter. Otherwise machine will stop at 21000.

Still need help with that? I can elaborate later how to replace them.
Chris

Dear Chris, great day for you, I appreciate your help, finally the dealer of this CTPs replaced the springs, however this company need local support so in the near future I will be in touch with you to do a preventive maintenance with your help, and naturally sharing the profit. Thank you...

 

[Dannyb_BPS]

Hi Chris -- I currently have the same exact warning. Do I just need to contact Amsky to get it cleared before the machine is locked out in 1000 more plates? Do you recommend anyone that I could contact in USA?

I own the machine right out.

Thank you for your help.
Peace,
-Daniel

 

[ChrisZ]

Hi Chris -- I currently have the same exact warning. Do I just need to contact Amsky to get it cleared before the machine is locked out in 1000 more plates? Do you recommend anyone that I could contact in USA?

You have PM.