printPlant
Well-known member
I have created splitting up job name rules in the job filter:
my file name is "DrupaSig_1_SA_1030x820" after ripping, rip produces the file name like
"DrupaSig_1_SA_1030x820.pdf (C)"
"DrupaSig_1_SA_1030x820.pdf (M)"
"DrupaSig_1_SA_1030x820.pdf (Y)"
"DrupaSig_1_SA_1030x820.pdf (K)"
everything is ok but color name does not detect my basysprint uv-setter 850. Because of this, i have not able to see the color strip before the job name on the monitor. When i manually change the name of color like
"DrupaSig_1_SA_1030x820.pdf (Cyan)"
"DrupaSig_1_SA_1030x820.pdf (Magenta)"
"DrupaSig_1_SA_1030x820.pdf (Yellow)"
"DrupaSig_1_SA_1030x820.pdf (Balck)"
then uv-setter completly detect my job name and color. it shows the color strip on the monitor before the job name. please check the linked file:
please provide me the solution:
I don't want to rename the color (C) to (Cyan) and uv-setter can detect ripped file name.
my file name is "DrupaSig_1_SA_1030x820" after ripping, rip produces the file name like
"DrupaSig_1_SA_1030x820.pdf (C)"
"DrupaSig_1_SA_1030x820.pdf (M)"
"DrupaSig_1_SA_1030x820.pdf (Y)"
"DrupaSig_1_SA_1030x820.pdf (K)"
everything is ok but color name does not detect my basysprint uv-setter 850. Because of this, i have not able to see the color strip before the job name on the monitor. When i manually change the name of color like
"DrupaSig_1_SA_1030x820.pdf (Cyan)"
"DrupaSig_1_SA_1030x820.pdf (Magenta)"
"DrupaSig_1_SA_1030x820.pdf (Yellow)"
"DrupaSig_1_SA_1030x820.pdf (Balck)"
then uv-setter completly detect my job name and color. it shows the color strip on the monitor before the job name. please check the linked file:
please provide me the solution:
I don't want to rename the color (C) to (Cyan) and uv-setter can detect ripped file name.