Impression Pressure

[Goatneck]

What are some signs that would indicate you have too much pressure between substrate and blanket?

 

[aqazi81]

Excessive Plate wear, Paper sticking to blanket, Register variation, dot elongation etc.

 

[Cornishpastythighs]

premature blanket failure, dot distortion, poor solids, loss of pressure between plate/blanket as blanket fails, registration issues, possible noticeable 'bump' at blanket gap affecting print quality to name but a few

 

[Pressroom Specialist]

Read my reply to "Print length" on a different topic.