Recently discovered this anomaly. See 2 attached images.
Cyan is normal. Magenta is whack.
Only occurs at 210 l/s.
However, all linescreens show another oddity.
When outputting steps w/ a linear LUT, they measure as much as 10 points below linear.
HP has been called, and is working on it, but no solution yet.
Any input would be greatly appreciated.
Cyan is normal. Magenta is whack.
Only occurs at 210 l/s.
However, all linescreens show another oddity.
When outputting steps w/ a linear LUT, they measure as much as 10 points below linear.
HP has been called, and is working on it, but no solution yet.
Any input would be greatly appreciated.