KBA 162a Plate slipping out of back clamp

lilprint

New member
1) Either something is stuck in the plate clamps not allowing it to fully close.
2) A clamp spring is broken inside the cylinder.
3)or the most likely is that the form roller pressure is to heavy and its pulling the plate out.
 

Automatically Autonomous Automation

Automatically Autonomous Automation
Although the autonomous car is not quite ready, a lights out print operation is something you can do right now if you have a comprehensive Print MIS (Management Information System). The advantages can put money on your bottom line. So what’s your next step? Link to Article

   
Top