konica c1085 can't print on 350gr one side

[slimbh]

Hi, our c1085 don't want to print on 350gr one side. but print On 350gr two side or one side less than 350gr.
We have fiery IC308, i think there is error for setting but i can't find it. Any one can help?
Thanks.

 

[chrisg42]

This sounds possibly like an issue with the finishing settings. If the job is currently set for face down delivery, change to face up. Make sure the main output tray is selected. Command Workstation normally gives an error message for conflicts like these. What actually happens? We print 350gsm on our 1085 all the time - simplex and duplex.

 

[slimbh]

Thanks for your help, you have right it's job setting face down delivery. By changing it face up, no problem.

 

[slimbh]

For printing in both side on 350gr, c1085 does not accept 330mm wide sheet. But accept 325mm wide size. on one side printing it accept 330 wide size.
There is difference for 5mm?

 

[slimbh]

And for printing in both side on 350g and 330mm wide size why it's not accepted ?

 

[slimbh]

On 325mm wide size it work