manual application coating for digital print (km6501)?

[wender]

manual application coating for digital print (km6501)?

 

[mannyC]

Do you need info on Hand-fed application of UV coat?

 

[wender]

sorry for the lack of info, i tried to delete the thread but could only delete the post.
but since I have a response, here it is.

what I'm looking for is an alternative to UV coating that can be applied manually with no machine needed for application or curing. something I could apply with a roller or even a silk screen flood.
I did find varnishes used for fine art coatings on canvas, but I'm not sure if that would work on konica digital prints.
any idea's would be greatly appreciated.

 

[JustinB]

Last I checked, KM prints were difficult to coat. Most people have to heat them up with IR lights before coating them so the coating will adhere to the toner.

Good luck!