Anyone have this happen to their screen on their cutter? This has been progressively getting worse over the past 3 months or so I guess - started as a couple distinct deletion lines, now about a dozen. The only thing I’ve thought to try is power off / disconnect and reconnect, which I did. This cutter gets powered down every day so I’m surprised the screen is getting worse this quickly. Not sure if this is something we can fix, if it’s the screen itself or a different electronic problem, or if we need to replace the whole microcut panel (how feasible is that?). Attached to a very old challenge cutter, which otherwise works fine, replacing the whole cutter wouldn’t be ideal.
Microcut JR Screen Troubleshooting
- Thread starter kslight
- Start date
Anyone have this happen to their screen on their cutter? This has been progressively getting worse over the past 3 months or so I guess - started as a couple distinct deletion lines, now about a dozen. The only thing I’ve thought to try is power off / disconnect and reconnect, which I did. This cutter gets powered down every day so I’m surprised the screen is getting worse this quickly. Not sure if this is something we can fix, if it’s the screen itself or a different electronic problem, or if we need to replace the whole microcut panel (how feasible is that?). Attached to a very old challenge cutter, which otherwise works fine, replacing the whole cutter wouldn’t be ideal.
narseman
Well-known member
I've never used one of these.. However.. If you are able to remove or loosen the face plate, you might be able to see a ribbon cable attached to the display, or display control board. I would try removing that, then reseating it. Perhaps wipe off the contacts with a Qtip and alcohol. Wiggle any other connectors GENTLY, to ensure they are seated too. Then turn it on and see if anything changed.
PricelineNegotiator
Well-known member
Have you tried calling the people on the top left of your photo?
I am going to guess that they are not providing technical support on a 20+ year old controller, especially to the end user. Their phone number on their website suggests it’s for sales only, otherwise can request someone onsite…which I wouldn’t be surprised if is contracted out to the local guys that I use already. I have sent this photo off to our local service company already, they couldn’t look at it this week, no ETA. I posted this because was interested in peer experience / troubleshooting tips that might save us some $ or get it fixed before they can fit it in their schedule.
PricelineNegotiator
Well-known member
You should just try calling them. We have a 20+ year old machine and they helped us in a pinch and told us steps to figure out whether it was issue x or y. Put it in a box and shipped it to them, had it back in our hands before the week was over.
smalloffsetpressexperts
Well-known member
Microcut Technical Support
Support for all things Microcut
Questions or Orders:1.800.932.0780 x250
Print Service
Member
Easy to replace a LCD screen if you know.
Pennypicher
Well-known member
Maybe Colter Pederson in New Jersey
Similar threads
PressWise
|
A 30-day Fix for Managed Chaos
As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line. “We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month. Learn how……. |
