PDF Manual for the TOKO 4700 CD

RNRPRINTINGNMAILING

Well-known member
Hi
Does anyone know where I can get a PDF of a Manual for my 4700cd
I have 2 of them.
I contacted a dealer and he sold me a 3 ring binder that was xeroxed and you can't read
anything.
Can anyone help.







Thanks


Rob IN VA
 
They have changed their name, but here is the info:
Pro. Graphics
4030 Simon Rd
Youngstown, OH 44512 Map

* (330) 783-0083

* Visit Web Site
 
I was a tech on toko for many years, send me an email address and I will send you my contact info, maybe I can answer your questions.
 
i have purchased one old toko1800a WD. I m having some electrical problem. First the ready button only runs if i am holding for continues. But after using for some days for setting job (not for running) it is worked finely. But yesterday after running for some time the counter is stopped suddenly. I found that P1 boards is heating & i got some burning smell. I found that one of rectifier Diod is heating up and stopped the machine. I dont have any electrical diagram or service manual. Pls. help me what can I do.
Thanks
Kesav
 
Was any solution found for this problem? I'm considering buying a multilith 1218 which I believe is a Toko 1218. Any help would be appreciated. Thanks Robert Carter.
 
Ya, 1st problem i solved as ready button is havin two microswitches one is spoiled I replaced & it works fine. 2nd p1 boasts is heating up due to high voltage. It requires 100v power supply but I have 110v stepdown so, changed the transformer which gives 24v to p1 board. Machine is running but counter doesn't works.
Multigraphic 1218, toko 1800 & Hans grohni YK1800e are same models. YK1800e is advanced model of toko 1800 only electric panel has modified. I got YK1800 manual in Scribd online PDF. But still require electrical diagram, manual.

Thanks
Kesav
 

PressWise

A 30-day Fix for Managed Chaos

As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line.

“We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month.


Learn how…….

   
Back
Top