Please help with error code on PT-R8600

[Anastasia]

Please help to solve this problem!! I need it very urgent..
We have these error on PT-R8600:
830408 Mai<-Pan C,RECORD_PNL_LD_CAL
830408 Pan<-Mai R,RECORD_PNL_LD_CAL
830409 Mai<-Mai C,RECORD_PNL_LD_CAL
830409 Hea<-Rec C,HEAD_CAL_TEMP
[H]<-EC
[H]->OK
[H]<-SR 6
[H]->TP 1 24.9
[H]->TP 2 25.0
[H]->TP 3 25.0
[H]->TP 4 24.9
[H]->TP 5 25.0
[H]->TP 6 25.0
[H]->TP 7 25.0
[H]->TP 8 25.0
[H]->OK
830431 Rec<-Hea R,HEAD_CAL_TEMP
830431 SCM<-Rec C,SCM_POS_CAL
R10/4 = -59999, R11/4 = 659999
dis=-146000,cur=1,tgt=-145999
830900 Rec<-SCM R,SCM_POS_CAL
R10/4 = -59999, R11/4 = 659999
830900 Rec<-Set R,SETUP_DONE
830901 Hea<-Rec C,HEAD_CAL
[H]<-EC
[H]->OK
[H]<-II 1 63
[H]->63ch: IopI=461
[H]->OK
[H]<-WX 1 270
[H]->OK
[H]<-ZP 1
[H]->OK
[H]<-ZM 900
[H]->OK
[H]<-FT 1 25.0
[H]->OK
[H]<-FM 3300 20.3
[H]->FM'=3310
[H]->OK
[H]<-SV
[H]->OK
[H]<-WSI 1 0 63
[H]->
[H]->ER 02
[H]->OK
831824 Rec<-Hea R,HEAD_CAL,d02
[H]->OK
(P)
831826 Mai<-Rec R,RECORD_PNL_LD_CAL,4d02
## 11/01 12:55:36 ##
E004d02:Expoure head error
[] [OK] []

 

[qisho]

Hello everybody.

We have CTP Screen 8600S-N, which connected to the processor Sirio with conveyor.
We have problem with calibration, after painting on the plate there are some lines remained on the plate, it gives no result if I change any parameters of Laser, rpm, zoom or focus, this lines still remains.

Please give some advice -- what parameters should be and where we should change, to solve this problem.

Thank you in advance.

 

[foshai]

Please can someone help me I have 8600 M2 error .

 

[ChrisZ]

What kind of M2 error?