Punch replace for Javelin T9000

[Wunder08]

Looking at potential punch replacement for our Javelin , getting metal shavings. Fuji tells us about a year left. About had a heart attack when found out cost via Fuji. Its a 2003 machine with about 80K plates. Two standard punches/ two custom.

Anyone out there know of alternative companies that work on Javelins?

 

[Cory Smith]

you might find some independents to work on the machine but am guessing the punches themselves will have to come from screen regardless.

Might want to contact Bob Weber or any of the other used equipment dealers and see if they have any. Replacing the actual punch heads is quite easy. They just sit on some pins and are connected by a cable. I replaced the set on our 9000 some time ago.

 

[grammy1]

Punch replace

Punch replace

What measurements on the punch? I have a 425mm bacher for sale. Removed from T6000. I will confirm that it will work but should.