• Best Wishes to all for a Wonderful, Joyous & Beautiful Holiday Season, and a Joyful New Year!

Ryobi 2800 with T-head registration

jimas67

Well-known member
Hi All,
I'm hoping someone can help with a small problem, on our Ryobi 2800 when trying to line up with the T-head, on a 81/2 X 11 sheet of stock I can get the middle targets to line up but my top and bottom will not. If targeting the press on an 11 X 17 sheet I can get the targets to hit on the top, middle and bottom. Would packing one or the other help on a short sheet?
 
if you put a sheet of 20lb bond behind the plate on the t-head, back off the impression to account for it, you will "shorten" the image by about 1/32" over the 11" length. i had an itek 960 that had crashed running envelopes that did this same thing. turned out the impression cylinder was slightly dented near the gripper edge.
 

InSoft Automation

InSoft Automation Unveils Imp Version 14

Revolutionizing Layout Planning and Automation

InSoft Automation announces the launch of Imp Version 14, the latest iteration of its industry-leading cost-based layout planning software. Packed with cutting-edge features, this release redefines efficiency, automation, and workflow optimization for printing and finishing processes.


Learn more…….

   
Back
Top