Trendsetter problem

[Adnan Azzam]

pls need help for trendsetter error beam balance not achieved
pls see attachment
regards

 

[ssutton503]

Perhaps this will help:

Creo CTP Firmware Error Number: 17693

 

[ecuagraphic]

You have error in laser head, I can check your equpment for teamviwer, We do not charge anything for the diagnostic service, we repair the head in case it is necessary.
xsegovia@ecuagraphic.com.ec

 

[leo]

Change laser diode (Static optic)

 

[Ergo]

Please check the chiller.

 

[panos valakos]

>>SET HEAD BPMAXERR 10
The laser has by default a value of 3 for maximum beam error.
If you increase from 3 to 10 will be okay.
But check if in case you have artifacts on plate,if not continue working with 10.

valakos.panos@gmail.com

 

[yachtsman]

Turn off the debris in media