Hi
Has anyone had experience of running water based flexo inks (colours & metallics) through a conventional anilox coating tower? I have a customer who is really interested in this concept and needs some help to get going. They have a Harris & Bruno chamber doctor system on a Ryiobi press with air knives and IR drying for conventional water based coatings. I believe they will need to substitute a flexo plate (45thou) with a closed cell compressible foam underblanket (1.70mm) and obviously look at anilox roller specifications. If anyone has nay info or advice I'd love to hear from you.
Cheers
Has anyone had experience of running water based flexo inks (colours & metallics) through a conventional anilox coating tower? I have a customer who is really interested in this concept and needs some help to get going. They have a Harris & Bruno chamber doctor system on a Ryiobi press with air knives and IR drying for conventional water based coatings. I believe they will need to substitute a flexo plate (45thou) with a closed cell compressible foam underblanket (1.70mm) and obviously look at anilox roller specifications. If anyone has nay info or advice I'd love to hear from you.
Cheers