Latest activity

What's new Featured content New posts New profile posts Latest activity
  • N
    namelessentity replied to the thread Intec SC6500.
    No you don't. We do portrait all the time without issue. Edit: don't mean to argue, just wanted to clarify is all.
  • N
    namelessentity replied to the thread Intec SC6500.
    Whoever sold it to you should have come out and trained you. The manual is pretty helpful though, are you sure your registration marks...
  • jwheeler
    jwheeler replied to the thread Intec SC6500.
    We have one. It sounds like you're files aren't setup correctly. You always need to make the artboard landscape in illustrator before...
  • EdwardB
    EdwardB reacted to pippip's post in the thread Xerox Versant Mottled Print with Like Like.
    Create a custom stock profile and run this https://www.support.xerox.com/en-us/article/KB0400025
  • M
    Milo Wilson reacted to pippip's post in the thread Xerox Versant Mottled Print with Like Like.
    Create a custom stock profile and run this https://www.support.xerox.com/en-us/article/KB0400025
  • C
    chrisio replied to the thread Morgana FRN Non Start.
    Thanks for replying. The system switch is a Schurter TA45 ABCWFC00E2...
  • C
    chrisio replied to the thread Duplo DBM 350.
    Hi. This is getting more weird as time goes on. If I send it through 6 sheets of 80gsm paper that is blank they will staple and...
  • M
    maxon replied to the thread Morgana FRN Non Start.
    Just by looking to the diagram and not being familiar with these machines in any way. - a 'system switch' would be suspect only if...
  • A
    APablo760 posted the thread Intec SC6500 in PostPress, Binding and Finishing Discussion.
    We recently purchased an Intec SC6500 die cutter with the Colorcut pro stand for our office. We are still on the learning curve on how...
  • P
    pippip reacted to Milo Wilson's post in the thread Xerox Versant Mottled Print with Like Like.
    Have you tried adjusting transfer voltage for the stock?
  • P
    pippip replied to the thread Xerox Versant Mottled Print.
    Create a custom stock profile and run this https://www.support.xerox.com/en-us/article/KB0400025
  • P
    Pennypicher replied to the thread Duplo DBM 350.
    Is it every book now? Maybe try a bunch with no staple just to eliminate them. Try leaving the rear jog loose so there is NO pressure...
  • C
    chrisio replied to the thread Duplo DBM 350.
    So the book gets stapled and the pusher begins to push it but its like the stopper doesn't drop in time or the book is held somehow in...
  • P
    Pennypicher replied to the thread Duplo DBM 350.
    So when the book gets stapled the stopper drops down and the pusher on the center belt advances the book forward. When this happens what...
  • jwheeler
    jwheeler replied to the thread introduce yourself!.
    Yes! Project Gutenberg already exists here. @xmoles you should definitely change the name. You also need to make your site a 'secure'...
Show older items
 
Back
Top