Recent content by CBSprinter

Bringing this thread back from the dead. I was able to print using the transparency with the stripe, but unfortunately the manufacture only has paperback transparency. How can I get this to print on our Canon C7011? TIA

How much is one of the off-line punching equipment? The inserter on our canon is after the punch unit so it will not "go backwards" to punch.

I have a Canon C6010 and am printing 2 up on 11x17 80# paper. I'm cutting this down to 8.5 x 11 once printed and running it back through the machine as a blank document to 44-hole punch the sheets. I'm running into a bit of a problem...where there is heavy black text, it is coming off slightly...

I ran a job on Canon C6010 2 up on 11x17 and cut it down to 8.5 X 11. Now I'm trying to punch the sheets 44 hole by sending them through inserter trays on Canon 135. This will avoid clicks on machine. For some reason the 80# text is a bit wavy and keeps jamming before it gets to gbc unit. Afraid...

Is there a way to adjust the gloss level on a Canon C6010 color imagepress? I'm running a pressure sensitive polyester clear substrate 12 x 18 GSM 210. Thanks.

This worked! Thanks!!

white stripe

It "jams" at E section before it gets to fuser.

Quick question, I'm trying to print on transparencies and cannot get our Canon C6010 to print on it. Is it even possible for this machine to run transparencies? I noticed "transparencies" is in the media catalog, but starting to wonder if this is a standard media catalog Canon loads on all...

Thanks. I've noticed upping the air to Strong coming out of tray 5 (LCT) seems to help a lot.

I'm having issues printing on transparency film (OHP) with the stripe on the lead edge on our Konica Minolta C7000. Any help with settings is greatly appreciated! Note that I know this machine is capable of printing on this material. Thanks.

Hey guys, Wondering if y'all could help me streamline my annual label requistion. I send an email to company managers with attached Label Requisition Form asking them to submit their labels needed. On the form, for example, there might be 8 different labels of 1.125" x 1.75" and they may have...

Hey guys, A few weeks ago, we had an issue with our BLM 200 (inline Plockmatic bookletmaker). Turns out we had a rodent problem...pee'd on a board and not sure what else. Technician seems to be leaning towards wiring harness needing replaced and possibly other things yet to be determined...

Hey guy's, I need your help/advice. We had a mouse get in the BLM200 booklet maker and caused damage. Looks as if he urinated and defecated on boards and wiring harness needing to be replaced. I'm pretty sure a insurance adjustor will have to come check it out for insurance claim. I'm one year...

Anybody be willing to check out my excel sheet and help me with the "flow" of the spreadsheet?