Standard Finishing
4OverXerox

Announcement

Collapse
No announcement yet.

Tighten Plate Clamps

Collapse
Canon
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Tighten Plate Clamps

    Hi
    Does anyone know how to tighten the tail edge plate clamps on my AB Dick 9995? One of the nuts that is used to tighten the plate clamp is slightly slack and I know its a 10 minute job for an engineer, but don't want to waste his time (and my money) on such a small repair.

  • #2
    Re: Tighten Plate Clamps

    Colin,

    That's easy. There are set screws that lock the 2 big stright head screws that apply pressure to each clamp nut.
    Loosen the set screws and turn the big screws IN for more pressure. Re tighten set screws.

    Ryobi head clamps need to be removed and rebuilt some times. The 9995 takes a special tool to remove the clamps.

    Good Luck
    OG

    Comment


    • #3
      Re: Tighten Plate Clamps

      Thanks for your help OG, much appreciated.

      Comment

      4OverDuploCanonKBATharsternAvantiXeroxSmartsoft (Presswise)

      Presswise Article

      Collapse

      Automated Order Status Tracking
      In PressWise Workflow Solution


      Presswise order status
      Quick overview of the order status tracking feature on PressWise’s automated workflow solution

      Link to Video

      4OverDuploCanonKBAAvantiXeroxTharsternSmartsoft (Presswise)

      What's Going On

      Collapse

      There are currently 5240 users online. 107 members and 5133 guests.

      Most users ever online was 6,611 at 11:23 AM on 02-27-2019.

      Working...
      X