Recent content by DJenkins

Ive been waiting for this post to go this direction and once again you all do not disappoint!

We also have the 9210 and i deal with this on a daily bases. I adjust Magnification within the paper profile and you have 0.5% adjustment each way. If the adjustment can not be corrected within the 0.5% range then i change the GSM of the paper up or down (usually down) to be able to reach...

I can second LeGerbs comment on Magnification issues on these machines. All though is sounds as you may have a combination of both unit issues and magnification. Ive actually had luck with adjusting registration while job is running. Yes it takes extra sheets you may not have but on reallly...

If your not already scoring it coming out of first unit you could try that.

I have found that Making sure to use the same paper brand/size on your stock helps keep this in check. I still have to adjust although not every time. I usually get it about right with in a couple sheets. I have seen some papers that can not be adjusted to correct size and its Thick cover stock...

I think the same thing all the time!!!

Last B/W printer i ran was a Cannon/OCE vario print. Registration is good if you know how to adjust. The way i got registration perfect was to start running the job/paper and adjust on the fly while running to get it perfect then of course adjust my count to replace the first 100 or so sheets i...

For digital work we currently use the Cannon V800 series. It prints well and does run anything from A2 to a 10x13 or bigger all the way to 13x19 sheet if you wanted. Its not the fastest out there but the toner print looks really good on an envelope. I also have word that they have a new envelope...

Hey we talked previously on this subject months ago. So come to find out now Quadient no longer even supports these machines so if you did find local tech to work on them they would not be able to get help from Quadient. Also im trying to find PM kits for the feeders and they are not available...

Having a 9210 i too have these issues. Something we try to do is use the same paper from week to week to help keep the adjustments we do make. However my tech did finally "Do some research" and found out that thier is a calibration to be made at the registration unit. It involves a template...

We just got a new Indigo 100K and although it has been a rough 4 months the press has finally started to settle in. Couple things sales people wont tell you. Tons of maintenance if done right could equal up to 8 hours a week or more. Tons of supplies to manage and make space for. You need to buy...

Yes it still requires the DIGITAL Window.

We have used the Mach 5 inkjet printer in the past they now have the mach 6 which is about 30K last i checked. I now use a Cannon V800 just for envelopes and they run around 40k i believe. The mach 6 inkjet is limited to uncoated stocks as it does not have a drying /curing attachment.

We do have a V800 and it is the same engine as the V700 V800 and V900. Only thing different between them is the speed of them. We only use our V800 for envelopes and i have to say it has been good for the year or so we have had it. Only have had techs in maybe twice after install but then again...

Had a situation close to this one last year. We bought a used DS600 Folder /nserter and ended up spending 10K for a install by our local quadient dealer. It was deemed at install that machine was complete and in good working order so they decided they would service it for us. Although they were...